Underground utilities present a significant risk to construction and infrastructure projects. Striking buried assets like electricity cables, gas mains or fibre networks can result in project delays, financial penalties, legal liability, and even personal injury.
PAS 128 (2022) is the UK’s recognised standard for underground utility detection, verification and location. Developed to bring consistency to how underground utility data is collected, verified and reported, it defines clear methodologies and quality levels for locating and recording buried services.
For engineers, contractors and project managers, a PAS 128 survey provides:
However, not all professionals requesting PAS 128 surveys are familiar with the standard’s quality levels or how to specify them properly.
This guide explains:
PAS 128 is a specification developed with the Institution of Civil Engineers (ICE) and published by the British Standards Institution (BSI). It sets out how underground utility surveys should be carried out and reported in the UK.
The standard was developed to address a long-standing issue within the construction industry: unreliable or incomplete information about buried utilities.
Project teams have historically relied on statutory utility records, but these can be outdated or inaccurate. As a result, excavation works may encounter unexpected utilities resulting in strikes (accidental damage to cables or pipes).
Utility strikes can cause:
PAS 128 introduces a structured methodology for collecting, verifying and presenting underground utility data so that project teams can make better informed decisions before excavation begins.
The standard focuses on two core principles:
This is achieved through clearly defined quality levels, which indicate how the utility information was obtained and how reliable it is likely to be.
One of the most important aspects of PAS 128 is the classification of utility information into four quality levels:
Each level reflects the method used to obtain the data and the confidence that can be placed in it.
Understanding these levels is essential when specifying a PAS 128 survey.
Quality Level D represents information obtained from existing utility records.
This typically includes data supplied by:
These records are collected and compiled into a composite drawing to provide an initial view of potential underground services.
QL-D is typically used during the early planning stages of a project to understand what utilities may exist in the area.
Utility records are not always reliable. Assets may have been installed, altered or abandoned without being fully documented.
For this reason, QL-D information should be treated as indicative rather than definitive.
Quality Level C involves correlating utility records with visible evidence on site.
Surveyors conduct a walkover survey to identify features such as:
These observations are then compared against the record data.
The aim is to identify discrepancies between the desktop records and the physical environment.
This stage improves understanding of where utilities may exist but still does not confirm their precise location.
Quality Level B represents the detection stage of a PAS 128 utility survey.
Surveyors use specialist equipment to identify the position of underground services without excavation.
The most common technologies used are Electromagnetic location (EML) and Ground Penetrating Radar (GPR).
These allow surveyors to trace the route of buried utilities and estimate their depth.
QL-B provides significantly greater confidence than record data alone. It allows project teams to understand:
QL-B surveys are widely used during the design and pre-construction stages of infrastructure and development projects.
Although detection methods are powerful, they do not always identify every utility present. Factors such as soil conditions, material types and congestion can affect results.
This is why QL-B does not provide absolute confirmation of utility positions.
Quality Level A is the highest level of confidence defined by PAS 128.
It involves physically exposing utilities using controlled excavation techniques such as vacuum excavation or trial pits.
Once exposed, the utility is surveyed to confirm:
QL-A verification is typically used when excavation or construction will occur close to existing utilities and precise data is required.
Examples include:
Because QL-A involves excavation, it is usually targeted to specific areas rather than being applied across an entire site.
PAS 128 surveys are increasingly specified during the planning and design stages of construction projects.
Typical scenarios where they may be necessary include:
Engineers require reliable utility information before finalising designs or excavation strategies.
Road upgrades, rail works and utilities installations often take place in congested underground environments where accurate mapping is essential.
Historic sites frequently contain undocumented or abandoned services.
PAS 128 surveys help identify these risks before construction begins.
City centres contain complex networks of utilities, often installed over many decades.
High-quality detection surveys are essential to avoid service disruption.
Many principal contractors and clients now require PAS 128 compliance within project specifications.
The word "survey" has a broad meaning, encompassing numerous different techniques and standards. As such, failing to clearly specify a PAS 128 survey can introduce project risk.
Potential issues include:
Unexpected buried services can be struck during excavation, creating serious safety hazards.
Emergency repairs and investigations can halt construction activities.
Repairing damaged utilities and revising designs can significantly increase project costs.
If a project team cannot demonstrate that appropriate survey standards were followed, liability may become contested.
Contractors may face claims if insufficient due diligence was undertaken before excavation.
By specifying PAS 128 appropriately, project teams establish a recognised industry standard for utility investigation.
Although every project is different, most PAS 128 surveys follow the same structured process, comprising the following steps.
The survey provider works with the client or design team to define:
Clear scope definition ensures the survey meets the project’s requirements.
Statutory utility providers are contacted to obtain available records.
These records form the basis of the QL-D dataset.
Surveyors visit the site to identify visible utility features and compare them with record information.
This stage produces the QL-C correlation.
Specialist survey teams conduct geophysical investigations using technologies like ground penetrating radar and electromagnetic locators.
This generates the QL-B detection data.
In higher-risk areas, trial pits or vacuum excavation may be used to expose utilities and confirm their position.
This stage provides QL-A verification.
All collected information is processed and correlated.
Utilities are mapped and classified according to their quality level.
Typical PAS 128 outputs include:
These deliverables support design, planning and risk management activities.
Although PAS 128 defines a framework, the quality of survey results can vary significantly depending on how the work is delivered.
Several factors influence the reliability of the final dataset.
Advanced detection equipment improves the ability to identify utilities in challenging environments.
This includes properly calibrated ground penetrating radar systems and electromagnetic locators.
Interpreting geophysical data requires technical expertise.
Experienced surveyors are better able to identify anomalies and correctly interpret subsurface signals.
Robust QA and QC processes ensure that survey data is checked, validated and correctly classified before delivery.
This reduces the risk of errors or inconsistencies.
A high-quality survey carefully correlates:
This integrated approach improves the reliability of the final utility map.
Well-structured CAD drawings and documentation enable engineers and designers to use the survey data effectively.
Poorly presented information can undermine the value of the survey.
Despite its increasing adoption, there are several pervasive misunderstandings about PAS 128 that should be addressed.
PAS 128 significantly reduces risk but cannot eliminate it entirely. Underground environments are highly complicated, and unknown services may still exist.
While QL-B detection provides valuable information, some construction activities require the higher certainty of QL-A verification.
The standard defines methodology, but the quality of implementation can vary between survey providers. Equipment capability, experience and QA processes all influence outcomes.
PAS 128 is a practical risk management tool that helps project teams avoid costly and dangerous incidents.
For contractors and project managers, PAS 128 plays an important role in managing construction risk.
Accurate utility information supports:
If an incident occurs, demonstrating that a PAS 128 survey was undertaken can help show that appropriate due diligence was carried out.
This can be important in insurance and contractual contexts.
Survey duration depends on site size, complexity and the required quality levels. Smaller projects may be completed in a few days, while large infrastructure sites may require several weeks.
Costs vary depending on survey scope, site conditions and the level of verification required. Projects requiring extensive QL-A verification will typically involve higher costs.
Not always. QL-A is usually targeted at areas where excavation or structural works will occur close to existing utilities.
Typical requirements include:
GPR can detect a wide range of underground utilities and estimate depth, but results depend on soil conditions, utility materials and site congestion. For this reason, GPR is typically used alongside electromagnetic detection techniques.
We deliver PAS 128 utility surveys for infrastructure, construction and development projects across the UK, helping project teams identify buried services early and reduce avoidable risk before work begins. With more than four decades of surveying experience and a nationwide office network, we can mobilise quickly and provide responsive support wherever your site is located.
Our utility surveys combine specialist detection teams, industry-proven EML and GPR equipment, and robust quality assurance processes to produce accurate, risk-based data aligned with PAS 128 methodology. Deliverables are prepared in clear CAD formats for engineers and design teams, with quality levels and reporting structured to support confident decision-making at each project stage.
Key capabilities include:
By aligning each survey with the appropriate PAS 128 quality level, we help reduce the risk of utility strikes, delays and redesign, giving your team the confidence to plan and build safely. Please contact us to learn how we can help you with your project.